b'b enchm icrometers NEW!777.1 e lectronicb enchm icrometers( with output )f eatures ands pecifications0-1"/0-25MMEquipped with an RS232 output Especially suitable for precision measurements where the work must be brought- ideal for use with DataSure to the gage. Work is staged between the anvil and spindle on an adjustable table,Wireless Data Collection System industry 4.0which can be raised to a selected height and locked in position by turning a knurled Starrett no-glare satin chrome thumb screw on the back of the base. Made of cast iron with black finish, the basefinish on thimble and sleeveis heavily proportioned to sustain gage accuracy and assure stability in use. It Large, easy-to-read .275" (7mm) tall characters, stands on three machined pads. high contrast LCD digital readouticroMeters Extremely hard and stable one-piece spindle777.1 Bench MicrometerAuto Off after 20 minutes of nonuseFriction Thimble, Spindle Lock, Shell and ThimbleInch/millimeter conversion on English versionsInch Grads Metric GradsCat. No. EDP Range Cat. No. EDP RangeSmooth friction thimble for uniform pressureM777.1XFLZ 72822 0-1" 777.1MEXFLZ 72819 0-25mm Measurement HOLD buttonCables and AccessoriesPart No. EDP DescriptionZero at any position795.1SCM 01124 Smart Cable to multiplexerRetain and return to true zero reading795.1SCKB 01125 USB Cable to PC (In focused window)Spindle lock795.1SCU 01126 Smart Cable with USB keyboard outputPT99492 65650 Two 3-Volt Batteries, CR2032Data Output Resolution: .00005" (0.001mm) Accuracy +/-.0001" (+/-0.002mm) PRESET button to install any reading at any position Ability to set minimum and maximum limits749.1 e lectronicm icrometerd epthg age f eatures ands pecifications( with output )Equipped with an RS232 output 0-12"/0-300MM - ideal for use with DataSure This depth micrometer has a wide 0-12"/0-300mm range for measuring the depthWireless Data Collection System industry 4.0of most holes slots, shoulders, and projections.Starrett no-glare satin chrome finish on thimble and sleeveA base shape design that will automatically position the fingers so the base will be Large, easy-to-read .275" (7mm) tall characters, held in place evenly. high contrast LCD digital readout Extremely hard and stable one-piece spindle749.1 Depth MicrometerSpindle Lock, Shell and ThimbleAuto Off after 20 minutes of nonuseInch Grads Metric GradsInch/millimeter conversion on English versionsCat. No. EDP Range Cat. No. EDP RangeMeasurement HOLD button749.1BZ-6RL 72780 0-6" 749.1MEBZ-150 72781 0-150mm749.1BZ-12RL 72779 0-12" 749.1MEBZ-300 72782 0-300mmZero at any positionCables and AccessoriesRetain and return to true zero readingPart No. EDP DescriptionSpindle lock795.1SCM 01124 Smart Cable to multiplexer795.1SCKB 01125 USB Cable to PC (In focused window)Data Output795.1SCU 01126 Smart Cable with USB keyboard outputResolution: .00005" (0.001mm)PT99492 65650 Two 3-Volt Batteries, CR2032 Accuracy +/-.0001" (+/-0.002mm) PRESET button to install any reading at any position Ability to set minimum and maximum limits Base Length 4"/rod diameter 5/32" Ground and hardened basestarrett.com 13'