Pin Vises 165 Double End Pin Vise 0-.125"/0-3.2MM • Reversible collets with two size capacities at each end • One chuck holds work or tools 0-.031" and .093-.125" diameter (0-0.8mm and 2.5-3.2mm). The other chuck holds .031-.062" and .062-.093" diameter (0.8-1.6mm and 1.6-2.5mm). • "Back support" provided by beveled chuck ends Pin Vises Starrett pin vises are useful for securely holding small stock, taps, drills, reamers, scribers, wire, small files, and other tools. The jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained. Handles and binding nuts are nickel-plated except for the 166 pin vise. A hole extends through the full length of the handles so that wires of any length and any diameter up to the full size of the tool can be held. NOTE: These tools not recommended for powered use. 162 Pin Vises 0-.187"/0-4.8MM The handles of these pin vises are reduced in size so that they can be rapidly rotated between thumb and finger when filing small work. 166 Pin Vises with Insulated, Octagonal Handles 0-.187"/0-4.8MM These pin vises are the same as our 162 except that they have an insulating PVC handle which is octagonally shaped, preventing them from rolling when laid down. 240 Pin Vises with Tapered Collets .010-.200"/0.25-5.1MM • Special tapered collet, providing maximum clamping surface • Smaller body diameter than the chuck to allow fast opening and closing and rapid rotation when used on small work • Available individually or as a complete set in a convenient case 240 Pin Vises Cat. No. EDP Range in mm 240A 51136 .010-.055 0.25-1.4 240B 51137 .025-.075 0.64-1.9 240C 51138 .045-.135 1.2-3.4 240D 51139 .110-.200 2.8-5.1 240 Pin Vise Sets Cat. No. EDP Description S240Z 51140 Set of All 4 Sizes in Protective Vinyl Case 165 Double End Pin Vise Cat. No. EDP Range in mm 165 50608 0-.125 0-3.2 166 Pin Vises Cat. No. EDP Range in mm 166A 50609 0-.040 0-1 166B 50610 .030-.062 0.8-1.6 166C 50611 .050-.125 1.3-3.2 166D 50612 .115-.187 2.9-4.8 166 Pin Vise Sets Cat. No. EDP Description S166Z 50614 Set of All 4 Sizes in Protective Vinyl Case 162 Pin Vises Cat. No. EDP Range in mm 162A 50599 0-.040 0-1 162B 50600 .030-.062 0.8-1.6 162C 50601 .050-.125 1.3-3.2 162D 50602 .115-.187 2.9-4.8 162 Pin Vise Sets Cat. No. EDP Description S162Z 50604 Set of All 4 Sizes in Protective Vinyl Case S240 S162 165 S166 358 P recision S hop T ools