Bi-Metal Deep Cut Bi-Met al Hole Saws The Deep Cut saw has an aggressive cutting action due to its dual pitch tooth design, and features a new tooth material with extra Cobalt,which enhances both heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 2" (51mm), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 2" (51mm) thick. Fea tures • Aggressive material penetration and kerf clearance • Ideal for solid materials or tubes of a wall thickness greater than 3mm • 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube • New tooth material for enhanced heat and wear resistance and greater product life • Hole saw depth of 2" (51mm) Cat. No. EDP Diameter mm DCH160M-G 00477 160 DCH168M-G 00478 168 DCH177M-G 00479 177 DCH210M-G 00480 210 Cat. No. EDP Diameter in mm DCH0034-G 00427 3/4 19 DCH2532-G 00481 25/32 20 DCH1036-G 00473 13/16 21 DCH0078-G 00428 7/8 22 DCH1056-G 00474 15/16 24 DCH0100-G 00429 1 25 DCH0116-G 00432 1-1/16 27 DCH0118-G 00433 1-1/8 29 DCH0136-G 00435 1-3/16 30 DCH0114-G 00431 1-1/4 32 DCH0156-G 00437 1-5/16 33 DCH0138-G 00436 1-3/8 35 DCH0176-G 00439 1-7/16 37 DCH0112-G 00430 1-1/2 38 DCH0196-G 00441 1-9/16 40 DCH0158-G 00438 1-5/8 41 DCH1116-G 00475 1-11/16 43 DCH0134-G 00434 1-3/4 44 DCH1136-G 00476 1-13/16 46 DCH0178-G 00440 1-7/8 48 DCH0200-G 00442 2 51 DCH0216-G 00445 2-1/16 52 DCH0218-G 00446 2-1/8 54 DCH0214-G 00444 2-1/4 57 DCH0256-G 00449 2-5/16 59 DCH0238-G 00448 2-3/8 60 DCH0212-G 00443 2-1/2 64 DCH0296-G 00452 2-9/16 65 DCH0258-G 00450 2-5/8 67 DCH0234-G 00447 2-3/4 70 DCH0278-G 00451 2-7/8 73 DCH0300-G 00453 3 76 DCH0318-G 00456 3-1/8 79 DCH0314-G 00455 3-1/4 83 DCH0338-G 00458 3-3/8 86 DCH0312-G 00454 3-1/2 89 DCH0358-G 00459 3-5/8 92 DCH0334-G 00457 3-3/4 95 DCH0378-G 00460 3-7/8 98 DCH0400-G 00461 4 102 DCH0418-G 00464 4-1/8 105 DCH0414-G 00463 4-1/4 108 DCH0438-G 00466 4-3/8 111 DCH0412-G 00462 4-1/2 114 DCH0434-G 00465 4-3/4 121 DCH0500-G 00467 5 127 DCH0514-G 00469 5-1/4 133 DCH0512-G 00468 5-1/2 140 DCH0600-G 00471 6 152 Applications Hole Saw Depth 2" (51mm) Rec. Cutting Depth 3-13mm ü >13mm ü Metal Inox (stainless) Non Ferrous Metals Cast Iron Wood Nail Embedded Wood Veneer Plastic Acrylic Fiberglass Formica Plaster Suspended Floors (wood) CUTTING PERFORMANCE - Excellent | Satisfactory DCH0200 13 starrett.com H ole S aws